1. Home
  2. Datasets

61 Results

None: oceanographic geographical features

Filter Results
  • 29 views
    87 sample stations including CTD, CTD-SAPS, Plankton Net, Boxcore, SAPS and ROV taken on board the RV Celtic Explorer in April 2012 during the BioDiscovery and Deep Ocean Ecosystems Survey. A large instrument package called a CTD is the standard workhorse of oceanographers...
  • 876 views
    Acoustic Doppler Current Profile (ADCP) hydroacoustic current meter data is similar to a sonar, attempting to measure water current velocities over a depth range using the Doppler effect of sound waves scattered back from particles within the water column. The term ADCP is a...
  • 167 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 53 views
    91 stations including CTD, Lander Deployment Plankton Net, Boxcore and ROV taken on board the RV Celtic Explorer in June 2013 during the Biodiscovery and deep ocean ecosystems survey. A large instrument package called a CTD is the standard workhorse of oceanographers for...
  • 157 views
    Low water mass movement of ocean currents from the Irish Offshore Strategic Environmental Assessment (IOSEA 5) publication. Large masses of moving water are called currents. In the oceans there are major surface currents, subsurface currents, and tidal currents. This data is a...
  • 203 views
    An ocean current is a continuous, directed movement of seawater generated by forces acting upon this mean flow, such as breaking waves, wind, the Coriolis effect, cabbeling, and temperature and salinity differences, while tides are caused by the gravitational pull of the Sun...
  • 393 views
    Monthly mean (average) values for oceanographic parameters in the North Atlantic Ocean SWAN and ROMS models. Mean values have been calculated on a monthly basis include sea surface temperature (degreeCelsius), sea bottom temperature (degreeCelsius), sea surface salinity (PSU),...
  • 412 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 558 views
    Western Irish Sea gyre data was provided by Petroleum Affairs Division. This data was created as part of the Irish Offshore Strategic Environmental Assessment (IOSEA). A gyre in oceanography is any large system of rotating ocean currents, particularly those involved with large...
  • 356 views
    Wave climate forecasts including significant wave height, mean wave period, mean wave direction, wave per unit crest length, peak period and energy period at Marine Institute weather and wave buoy locations.
  • 7560 views
    An ocean current is a continuous, directed movement of seawater generated by forces acting upon this mean flow, such as breaking waves, wind, the Coriolis effect, cabbeling, and temperature and salinity differences, while tides are caused by the gravitational pull of the Sun...
  • 179 views
    The hydrodynamic model, ROMS (Regional Ocean Modeling System), is run for a domain that covers a significant portion of the northeast Atlantic at a resolution of 2.5 km and and with 40 vertical levels.7-day forecasts are generated for research purposes and for comparison with...
  • 136 views
    Marine Institute daily oceanographic model of particle transport probability at the surface, 20m and bottom of the water column in Bantry Bay and Mizen Head. Data attribute structure includes time, release location, longitude, latitude, particle hours and particle track.
  • 2315 views
    A tidal atlas or a tidal stream atlas is used to predict the direction and speed of tidal currents. A tidal atlas usually consists of a set of 12 or 13 diagrams, one for each hour of the tidal cycle, for a coastal region. Each diagram uses arrows to indicate the direction of...
  • 148 views
    Sea surface temperature is collected via permanent scientific equipment on board the MI research vessel RV Lough Beltra. Data includes temperature from the hull mounted sensor known as 'Hull Sea Temperature' and temperature/salinity from the temperature sensor known as...
  • 1427 views
    CTD or Conductivity Temperature Depth stations measure temperature, conductivity and depth of the water column at various depths from the surface to within 10m of the seafloor. A CTD is the oceanographic instrument used to determine the conductivity, temperature, and depth of...
  • 40 views
    45 stations including CTD, CTD-SAPS and ROV, taken on board RV Celtic Explorer cruise CE14009 in June 2014 during the Ecosystem functioning and biodiversity at Whittard Canyon Survey. A large instrument package called a CTD is the standard workhorse of oceanographers for...
  • 18 views
    65 stations including CTD, Ringnet (500um), Zooplankton net (200&50um), Phytoplankton net, Trawl and XBT taken on board two RV Celtic Explorer cruise CE14006 in April 2014 during the Transatlantic Added Value Survey. A large instrument package called a CTD is the standard...
  • 906 views
    In oceanography, a front is a boundary between two distinct water masses. The water masses are defined by moving in different directions, i.e. on one side of the front the water is generally moving in one way, and on the other side of the front, the water is moving in another....
  • 699 views
    Waverider buoys have collected observations and measurements on wave characteristics including wave height and period statistics. Waverider buoys are located in the Galway Bay 1/4 Scale Test Site and the Full Scale Atlantic Marine Energy Test Site (AMETS) located off the Erris...
You can also access this registry using the API (see API Docs).