-
TimpeallachtThe prawn (Nephrops norvegicus) are common around the Irish coast occurring in geographically distinct sandy/muddy areas were the sediment is suitable for them to construct their burrows. Nephrops spend a great deal of time in their burrows and their emergence from these is...
-
Designated wave energy test site for supporting ocean energy device research and development at 1/4 scale. The Galway Bay 1/4 scale wave energy test site is located 1.5km from Spiddal pier within inner Galway Bay on the west coast of Ireland. Data has been collected in Galway...
-
TimpeallachtThis data comprises wave data collected from the SmartBay buoy moored in Galway Bay. The TRIAXYS Directional Wave Sensor collects wave data and returns the following parameters: No Zero Crossings (Number) HAvg (Average Wave Height) (Meters) Tz (Mean Spectral Period) (Seconds)...
-
TimpeallachtThe 9DOF (9 Degrees of Freedom) sensor measures and reports linear and angular accelerations along three axis plus spatial orientation using a combination of sensors. The sensor includes the ADXL345 accelerometer, the HMC5883L magnetometer, and the ITG-3200 MEMS gyro.
-
TimpeallachtAcoustic Doppler Current Profile (ADCP) hydroacoustic current meter data is similar to a sonar, attempting to measure water current velocities over a depth range using the Doppler effect of sound waves scattered back from particles within the water column. The term ADCP is a...
-
Survey stations represent the locations where underwater television surveys have taken place during Nephrops Underwater Television (UWTV) surveys. The prawn (Nephrops norvegicus) are common around the Irish coast occurring in geographically distinct sandy/muddy areas were the...
-
The prawn (Nephrops norvegicus) are common around the Irish coast occurring in geographically distinct sandy/muddy areas were the sediment is suitable for them to construct their burrows. Nephrops spend a great deal of time in their burrows and their emergence from these is...
-
TimpeallachtA tidal atlas or a tidal stream atlas is used to predict the direction and speed of tidal currents. A tidal atlas usually consists of a set of 12 or 13 diagrams, one for each hour of the tidal cycle, for a coastal region. Each diagram uses arrows to indicate the direction of...
-
TimpeallachtWaverider buoys have collected observations and measurements on wave characteristics including wave height and period statistics. Waverider buoys are located in the Galway Bay 1/4 Scale Test Site and the Full Scale Atlantic Marine Energy Test Site (AMETS) located off the Erris...
-
The phytoplankton sample sites and phytoplankton counts coincide with finfish aquaculture sites and monitoring results include the following parameters; Sample Code, Location Code, Location Name, Location XY, Phytoplankton Species, Phytoplankton Count, Phytoplankton Biomass...
-
Irish Wave Rider Buoy Network 30 minutes real time wave data collection. The parameters collected include; Longitude (decimal degrees), Latitude (decimal degrees), dateTime (yyyy-mm-ddThh:mm:ss.sss), Station ID, Peak Period (secs), Peak Direction (Degrees True), Upcross Period...
-
TimpeallachtThis data comprises weather data collected from the SmartBay buoy moored in Galway Bay. The Airmar Weather Station used to collect this data collects wind, temperature and pressure data and returns the following parameters: Latitude and Longitude Air Temperature (Degrees...
-
The CMPS10 Tilt Compensated Compass sensor is a tilt compensated compass which calculates a bearing. Employing a 3-axis magnetometer , a 3-axis accelerometer and a 16-bit processor, the output of the three sensors measuring x, y and z components of the magnetic field,...
-
This data comprises loadcell force data collected from the SmartBay buoy moored in Galway Bay. The Strainstalls load shackle measures tensile loads. This dataset contains measurements of load from mooring chains attached to the SmartBay buoy.