geothermal-vertical-closed-loop-suitability-1-40-000-ireland-roi-itm

Arna fhoilsiú ag: Geological Survey Ireland
Téama: Energy
Tuairimí: 6
Rátáil oscailteachta:

Data Resources (4)

DATA VIEWER
available as data viewer

Data Resource Preview - WMS

Téama Fuinneamh
Dáta eisithe 2016-04-06
Dáta nuashonraithe 2021-10-14
Cloíonn an tacar sonraí leis na caighdeáin seo The INSPIRE Directive or INSPIRE lays down a general framework for a Spatial Data Infrastructure (SDI) for the purposes of European Community environmental policies and policies or activities which may have an impact on the environment.
Nótaí Cearta {"Data that is produced directly by the Geological Survey Ireland (GSI) is free for use under the conditions of Creative Commons Attribution 4.0 International license. https://creativecommons.org/licenses/by/4.0/ https://creativecommons.org/licenses/by/4.0/legalcode Under the CC-BY Licence, users must acknowledge the source of the Information in their product or application. Please use this specific attribution statement: \"Contains Irish Public Sector Data (Geological Survey Ireland) licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence\". In cases where it is not practical to use the statement users may include a URI or hyperlink to a resource that contains the required attribution statement.","Data that is produced directly by the Geological Survey Ireland (GSI) is free for use under the conditions of Creative Commons Attribution 4.0 International license. https://creativecommons.org/licenses/by/4.0/ https://creativecommons.org/licenses/by/4.0/legalcode Under the CC-BY Licence, users must acknowledge the source of the Information in their product or application. Please use this specific attribution statement: \"Contains Irish Public Sector Data (Geological Survey Ireland) licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence\". In cases where it is not practical to use the statement users may include a URI or hyperlink to a resource that contains the required attribution statement.",license,"Data that is produced directly by the Geological Survey Ireland (GSI) is free for use under the conditions of Creative Commons Attribution 4.0 International license. https://creativecommons.org/licenses/by/4.0/ https://creativecommons.org/licenses/by/4.0/legalcode Under the CC-BY Licence, users must acknowledge the source of the Information in their product or application. Please use this specific attribution statement: \"Contains Irish Public Sector Data (Geological Survey Ireland) licensed under a Creative Commons Attribution 4.0 International (CC BY 4.0) licence\". In cases where it is not practical to use the statement users may include a URI or hyperlink to a resource that contains the required attribution statement.",license}
Minicíocht Nuashonraithe Eile
Teanga English
Lamairne https://dcenr.maps.arcgis.com/apps/webappviewer/index.html?id=9ee46bee08de41278b90a991d60c0b9e
Clúdach Geografach i bhformáid GeoJSON {"type":"Polygon","coordinates":[[[-10.47472, 51.44555],[-10.47472, 55.37999], [-6.01306, 55.37999], [-6.01306, 51.44555], [-10.47472, 51.44555]]]}
SRS Irish Transverse Mercator (ITM, EPSG:2157)
Méid Ingearach {"maxVerticalExtent": "0", "verticalDomainName": "sea level", "minVerticalExtent": "0"}
Eolas Dualfhoinse The Geological Survey of Ireland has produced ground source heat suitability maps for different collector types – closed loop horizontal, closed loop vertical and open loop. In the case of open loop, two maps have been developed – for domestic-scale systems and for commercial-scale systems – since the groundwater volume demand will be different in each case. The maps are based on different geological maps, such as subsoil, bedrock and aquifers. The Geological Survey of Ireland produces and holds maps for subsoil type, bedrock type, and groundwater availability (aquifers). These maps can be useful in making preliminary assessments about whether the ground conditions under your site would be favorable for closed loop systems, open loop systems or both. Groundwater Resource or Aquifer map. Delineates different volumes of bedrock or sand/gravel according to their groundwater resource potential. Aquifers are subsurface bedrock or sand/gravel deposits capable of storing and transmitting groundwater in useable quantities. Virtually all rock types are able to yield sufficient water for a domestic drinking water supply, but not all rock types are guaranteed to give sufficient water for an open loop GSHP, unless fracture zones are located. The better supplies can be found in karst limestone rocks (blue and aqua), well-fractured rock (green) and sands/gravels (maroon). The less productive bedrock aquifers are shown in brown and beige. Groundwater Vulnerability map Identifies different areas of the land surface according to how well they protect the groundwater resource beneath. Areas where the subsoil is <1m thick or rock is outcropping are shown in red and generally will not be suitable for horizontal closed loop systems, unless the site is enhanced by the provision of additional cover. Areas where the subsoil is up to 3m thick are shown in pink and may or may not be suitable for horizontal loop systems. Areas shown in green comprise >10m of clay, and will be highly suitable for horizontal and vertical closed loop systems. Subsoil type map Identifies different subsoil types that occur between the base of the soil zone and above the top of the bedrock. Different subsoil types have different moisture contents and thermal properties. Tills (shown in dark blue and purple) can be silt- or clayrich, with clays particularly favoring moisture retention. Peats (shown in brown) have a very high moisture content. Sands/gravels (shown in green), unless fully saturated with groundwater (i.e. below the water table), are generally poor at retaining moisture and, therefore, are poor at conducting heat through the ground. Alluvium (river sediments, shown in orange) are usually saturated, but limited in extent. Subsoil permeability map Identifies areas of highly, moderately and poorly permeable subsoils. Different subsoil types have different moisture contents and thermal properties. Low and moderate permeability subsoils (shown in blue and yellow, respectively) are dominated by clay and silt, and have good moisture retention capacity, which is beneficial for transfer of heat from the underground to the heat collector pipes in closed loop systems. High permeability (shown in green) subsoils are dominated by sand and gravel. Where these are unsaturated (i.e. above the groundwater table), these subsoils are not good at transferring heat from the ground to the collector loop. The ground source heat suitability maps are intended for use in making preliminary assessments about whether the ground conditions under your site would be favourable for closed loop systems, open loop systems, or both. Site assessments should be undertaken to confirm site conditions and the influence they will have on the system design. Other factors influencing system design will include the site footprint and access. In some cases, sites can be engineered to allow particular systems to be used in otherwise unfavorable settings. Important factors in the suitability of a site for vertical closed loop systems are the subsoil thickness and the thermal conductivity of the bedrock. In 2024, a new database was created in ArcGIS Enterprise. Using ArcGIS Pro 2.3, the dataset was renamed as part of a GSI data standardisation process. Metadata was updated to the new GSI standard based on INSPIRE and ISO standards.
Tréimhse ama clúdaithe (tús) 2016-04-06
Tréimhse ama clúdaithe (deireadh) 2016-04-06